Home About us Products News Service instruct Jobs Associate Contact us MSN service
FAQ
 
Consultation types :
  • Frequently Asked Questions
  • Audio Code
  • Frameter Installments in Page
  • Other Questions
  • V610/V600 Series Questions
  • V611 Series Questions
  • V620 Series Questions
  • Encrypted system
  • V600 Series Questions
  • How to Implement Auto-Routing with Dial
    How to set V611 ATA as analog trunking?
    V611
    Busy Tone Frequency
    How can I get the Call Progress Tones?
    Nethide Installation Guide
    How to make a PSTN call through ht610/611?
    How to set the parameter of busy signal in FXO port of HT611 to solve the biting line problem?
    Why does it sounds busy signal when dial the HT611 FXO port through PSTN ?
    Why the telephone connected with the FXS port of HT611 can not display the PSTN number?
    why the second dialing fails to be recognized by PBX some time after getting through the voip calli
    How to judge the HT-series products' working status by LCD?
    The ATA got an IP, but I cannot open the configuration pages, why?
    There is no voice hint after pressing ‘***’ on the phone, why?
    In what way do HT-series obtain the IP address? How to get the IP address of the gateway and teleph
    Why can I answer a call but not make a call after the success registration?
    .How to reset my HT-series audio gateway to factory default setting?
    When it works with PPPOE conection,I can obtain the IP adress before the reboot but why no IP adres
    Why cannot the phone switch to PSTN by pressing '*00'?
    Why the gateway rings again after we hang up the call?
    25条记录  每页显示20条  1/2页  首页 上页 下页 尾页 
    [ Service ]
    Type: *
    Contact: *
    Company:  
    Email: *
    Tel:  
    Fax:
    Address:  
    Subject: *
    Content: *
       
     
    Services
    Download
    Technology Texts
    FAQ
    Pruduct Purchase
    Sales network
     
    About us | Jobs | Associate | Contact us
    2008 VONETS, Ltd. www.vonets.com All Rights Reserved.